Ditec SSS-5 Monitored Swing Door Safety Sensor

£230.00 +VAT


Purchase this product now and earn 23,000 Points!
SKU: HOTSSS-5S1 Category:


Full Swing Door Safety with only 1 PCB unit

The SSS-5, with 6 spots of detection per
PCB unit ensures pedestrian safety levels
exceeding EN16005 standards

• Maximise Pedestrian Safety
Only 1 PCB unit is required to provide 800 – 1,000mm of safety
coverage along the swing door width
• Save on Costs
No need to use 2 PCB units in one sensor housing to ensure
compliance with EN16005
• Reduce Installation Times
Removable wiring terminal block and push button detection
distance settings significantly reduces on-site installation time.
• Strong & Robust
Solid, tough sensor body design not susceptible to vandalism
or damage during installation
• Performance Reliability
The SSS-5 performs reliably on all floor surfaces and
reflective environments

Technical Specification

Model SSS-5 Monitored Swing Door Safety Sensor
Detection Method Infrared Presence Detection with P.S.D. distance measurement
Installation Height 2600mm (8.5ft) Max
Sensor Dimensions SSS-5S1: 360mm (W), 45mm (H), 45mm (D)
SSS-5M1: 692mm (W), 45mm (H), 45mm (D)
SSS-5L1: 1,023mm (W), 45mm (H), 45mm (D)
Pattern Adjustment Beam Angle Adjustment: 5, 10, 15, 20, 25 degrees
Detection Distance Adjustment: Dead Zone, 50-500mm
Detection Range 0 – 2.5m (0 – 8ft 2 inches)
Presence Timer Infinity
IP Rating 54
Power Supply 12 to 24V AC or DC ± 10%
Power Consumption AC12V-1.7 [VA] (Max), DC12V-95 [mA]
AC24V-2.3 [VA] (Max), DC24V-55 [mA]
Output Relay Relay contact: DC50V 0.1A Non Voltage 1C
Response Speed Less than 100 msec
Relay Hold Time 0.5 sec
DIP Swtich Functions Test Input: 1 BIT
Optical Interference: 1 BIT
Relay Output Mode: 1 BIT
Masking Detection Spots: 2 BIT
Detection Range: 3 BIT
Operating Temperature -20°C to +60°C, (-4°F to 140°F)



Additional information

Weight 2 kg


There are no reviews yet.

Be the first to review “Ditec SSS-5 Monitored Swing Door Safety Sensor”