Menvier M600KEP Control Panel with MKP3 Keypad

£164.33 +VAT


Out of stock

SKU: M600KEP Category:



Alternative Click Here


The M600 is designed for maximum flexibility and can be operated from anywhere in the property via multiple remote keypads, it can also be programmed to monitor different rooms at different times.

Key features

  • PD6662 grade 2, once the standard is agreed
  • Simplified, easy-programmable software
  • Energy efficient, intelligent power supplies
  • 868MHz narrow-band radio expansion
  • Programmable zone configurations simplify system takeovers
  • Backward compatibility with Menvier Networker expansion




Product name M600
Security Grade PD6662: 2004, EN50131-1:2006, TS50131-3:2003, EN50131-6:1997, Grade 1, or 2. DD243:2004. 
Sales number M600KEP
Product Description 40 Zone Grade 2 Panel with comms


Max zones 40
Zones – on board 8, CC or FSL
Zones – on expander(s) 32
Standard wired outputs – on board 3
Communicator outputs: 8
Outputs on expander module(s) None
Setting Levels: Full set for each ward
Partitions: 4
Log capacity (events): 1000
No. Keypads 16 max
Internal Clock ±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader Yes
Remote Servicing None


Access code  4 or 6 digits
Number of user codes 50
Code blocking Programmable
Proximity tag differs 4,294,967,296
Back tamper (in addition to lid tamper) Separate terminals


End Station dimensions: 385(W), 312(H), 95(D) mm
End Station weight (w/o battery): 4.9 Kg
Case material 1.2mm mild steel


Keypad name MKP1, MKP2, MKP3


Environmental Grade Class II
Operating temperature -10 to 40 C
Humidity 0 to 75% RH, non-condensing.


Expander/Built-in: Expander (MRNode)

PSTN Communications

Built in Communicator Yes
Plug on communicator No
Plug-by communicator
(uses screw terminals)
Protocols: Fast Format, SIA, SIA II, SIA III, Extended SIA II, Contact ID
Speech Dialler No
ATS rating 2
Line sharing Yes
REN 0.2

Power Supply

EN50131-6 Type A
Mains power supply 145mA @ 230Vac±10%, 50Hz
End station psu 13.65VDC, 1.25A.
End station consumption 200mA
Communicator consumption n/a
Standby Battery 12VDC, lead-acid
Max recharge time: 24 hrs max. for 17AH battery
Battery charge limit 750mA
12V Aux supply (inc LS) Depends on attached peripherals
14V4 supply None

Data Connections

RS232 No
Printer Yes, three pin serial RS232
Ethernet None
GSM None
Engineer keypad port Yes

Wired Outputs

Bell trigger Switched -ve @500mA
Strobe trigger Switched -ve @500mA
H/0+ (positive holdoff) Yes
H/0- (negative holdoff) Yes
O/P 1 1 voltage-free changeover 1A max @ 24Vac or 24Vdc
O/P 2 Switched -ve @500mA
O/P 3 Switched +ve @500mA
O/P 4 n/a
O/P 5-8 n/a
LS (loudspeaker) 16 Ohms
Communication outputs 8. Source 5mA in 12V condition, sink 100mA in 0V condition, selectable output sense
ST (Siren test) None

Wired Inputs

TR Yes, -ve
Tellback/Remote reset** Yes, 0V applied
Line Fault input** Yes, +12V applied
Aux Tmp Yes


Mains T315mA 250V 20mm
Other The panel uses fast-acting polyswitch fuses for overcurrent protection:

Additional information

Weight 1 kg


There are no reviews yet.

Be the first to review “Menvier M600KEP Control Panel with MKP3 Keypad”