Description
Features:
- 12m volumetric coverage
- Dual element pyro-electric sensor
- Selectable EOL (End Of Line) resistors
- Blue Wave Technology
- Auto sensitivity feature
- Digital temperature compensation
- Tamper proof brackets included
- Sealed optics
- ABS plastics
- Complies with EN50131-1
Technical characteristics:
- Blue Wave technology
- Automatic sensitivity
- Set sensitivity – Auto, High or Low
- Digital temperature compensation
- Optical quad
- DEOL resistor on board
- Tamper protection – Front and rear
Optical, lens and detection characteristics:
- Maximum range 15m
- Detection speed 0.3- 3.0m/s
- Coverage angle 85 degree
- Detection zones 60
- Detection planes 7
- Protection of area under the detector (creep zone)
- White light filter 6500 Lux
- Protection 3 dimensional
- Lens Ultraviolet light filter
- Optics Sealed optics
- Detection method Digital Quad signal processing
Mounting:
- Wall mounted Bracket included
- Ceiling mounted Bracket included
- Optimum coverage height 1.8 – 2.4m
- Certified mounting height 2.4m
Environmental and operating features:
- Storage temperature -40C to 80C
- Certified operating temperature -10C to 40C
- Nominal operating temperature -30C to 70C
Dimensions:
- Height 117mm
- Width 69mm
- Depth 50mm
Weight:
- 125g without bracket
Electrical & battery:
- Operating voltage 9-16V DC 13.8V DC typical
- Quiescent current consumption 13mA @ 12V (Min), 16mA @ 12V (Max)
- Contact Resistance <10 ohms
- Relay outputs 50mA 60 VDC, 42 VAC (RMS)
- Tamper switch 12V 50mA
Certifications and warranty:
- Security Grade Grade 2
- Environmental class II
- EN Certificate EN50131-2-2:2008, EN50131-1, PD6662:2017
- Certification type IMQ
- Certificate number CA12.1172
- Electrical conformity CE
- Warranty 5 years
Gary Bicknell –
This is not a Dual Technology sensor (it has no Microwave)it is a dual element Quad. I normally use this detector when it is not connected to an alarm system but stand alone for
switching something on, buzzer, door bell or the like. It can be used like this because it has a selectable N.O. / N.C relay. 99 % of sensors have a normally closed relay, this one can be switched to normally open if needed making it very versatile at switching things momentarily, or longer via a cheap time latching relay.
Gary (GBS Electrics)