Scantronic 9751 8 to 24 zone Control panel and Prox Keypad

£162.49 +VAT


Out of stock

SKU: 9751EN-43 Category:



Available while stocks last

Alternative Click Here



The Scantronic 9751 security system, is a fully programmable panel that can protect up to 24 potentially vulnerable areas of a building.

The system has 8 wired zones and can be expanded up to 24 zones using wired or Class VI wirefree expanders operating on 868 MHz narrow band frequency. This ensures flexibility whatever the installation requirement. Wirefree expanders eliminate the need for complex wiring between devices, causing minimum disruption to the décor.

The 9751 is ideally suited to home security or small commercial security applications and has been designed to provide flexibility and ease of use. It has simple A, B and C settings, providing full and part set options. Up to 4 remote keypads can be added to the system, allowing easy operation from any location using either a 4 digit code or encrypted proximity tag.

To reduce maintenance time, the 9751 has upload/download capabilities allowing the installer to program and perform diagnostic tests remotely. As well as the built in modem for communications, the system has secondary outputs to operate other communication devices.





Product name 9751
Security Grade BS4737
Sales number 09751UK-50
Product Description 24 Zone Panel plus 99xx keypad


Max zones 24
Zones – on board 8 FSL or 8CC (with common tamper)
Zones – on expander(s) 16
Standard wired outputs – on board 3
Communicator outputs: 8
Outputs on expander module(s) None
Setting Levels: 1 Full + 2 Part (one partition)
Partitions: None
Log capacity (events): 250
No. Keypads 4
Internal Clock ±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader Yes
Remote Servicing Yes


Access code  4 digits
Number of user codes 16 plus installer plus duress
Code blocking Blocked for 90s after 13 incorrect characters in series.
Proximity tag differs 4,294,967,296



End Station

End Station dimensions: 245(W), 235(H), 90(D) mm
End Station weight (w/o battery): 2.45 kg
Case material Steel


Keypad name 9941/9943


Environmental Grade Class II
Operating temperature -10° to +55°C
Humidity 96% RH


Expander/Built-in: Expander (see RFX08 or RFX16)

PSTN Communications

Built in Communicator Yes
Plug on communicator No
Plug-by communicator Provides 8 programmable outputs for plug-by module.
Protocols: Fast Format, SIA, SIA II, SIA III, Contact ID
Speech Dialler No
ATS rating 2
Line sharing This product can share a PSTN line with other telephony or fax equipment.

Power Supply

EN50131-6 Type A
Mains power supply 230VAC +10%/-15%, 1A max, 50Hz ±5%
End station psu 13.8VDC, 1.0A
End station consumption 115mA quiescent, 150mA active
Communicator consumption n/a
Standby Battery 12V rechargeable lead-acid, gel-type battery. Note that a 17Ah battery cannot fit inside the case.
Standby time:  Depends on battery
Max recharge time: Depends on battery
12V Aux supply (inc LS) 500mA, 12VDC minimum, 13.8VDC maximum, ripple ±2% maximum.
14V4 supply None
12V Keypad bus None
Monitoring includes Mains fail, battery low voltage, battery failure.

Data Connections


Wired Outputs

Bell trigger None
Strobe trigger None
O/P 1 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 2 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 3 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 4 None
O/P 5-8 None
LS (loudspeaker) Supports two parallel-connected, externally mounted loudspeakers for internal sounder or EE tones: minimum speaker impedance 16Ω.
Communication outputs 12V logic outputs, negative applied in alarm (positive removed), 50mA maximum.
ST (Siren test) None

Wired Inputs

TR Tamper return for Bell
Tellback/Remote reset** +12V applied to operate reset.
Line Fault input** +12V applied to indicate line failure.
Aux Tmp None


Mains T-250mA 250V.
Other 12V Aux = 1A Fast
  Battery = 2A Fast



Additional information

Weight 2 kg


There are no reviews yet.

Be the first to review “Scantronic 9751 8 to 24 zone Control panel and Prox Keypad”